- Filmmaking, TV, VR and Web Broadcast
- Optimised for DSLR Shooters
- Dual Onboard Omnidirectional Microphones
- 4 x XLR-1/4" Inputs with Phantom Power
- 3.5mm Mic/Line Input with Plug-In Power
- Records 4 Track & Stereo Mix at 96 kHz
- HDMI I/O, Camera, Line and Headphone Outs
- Supports Battery, AC or USB Powering
- Support SDXC Cards up to 128GB
- Ambisonics Mode with Stereo Monitoring
Tascam DR-701D 6-Track Recorder
For filmmaking, television, audio-for-VR and web broadcast application where you want to record direct sound, ambience and your real-time mix, the Tascam DR-701D multi-track filed recorder is an ideal companion for your DSLR. Capture up to four tracks of high-resolution audio from external sources and the onboard omnidirectional microphones plus a stereo mix, route audio to and from your camera and conveniently monitor through headphones. With versatile mounting possibilities, timecode support and tight camera sync via HDMI I/O, the DR-701D integrates seamlessly into your video production setup.
Versatile powering methods and remote-control options makes the DR-701D ideal for location recording and extended video shoots. Its four balanced XLR-1/4" combo inputs handle mic or line-level signals (even +4 dBu from high-end sounds mixers) and can independently supply phantom power. A 3.5mm mic/line input with selectable plug-in power is provided for situations that require you to record a lavalier microphone or the output of a wireless receiver. Utilities setting such as stereo safety track recording, automatic level control, limiting and low-cut filtering to achieve clean, undistorted recording.
To see a list of compatible cameras that have been verified for use with the HDMI of the DR-701D, click here.
Simultaneous 6-Track Recording
Using the built-in mixer, four tracks and their stereo mix can be simultaneously recorded at up to 24-bit / 96 kHz resolution. Alternatively, record two channels at 192 kHz for truly detailed stereo capture.
Onboard Omnidirectional Microphones
The DR-701D's two onboard condenser microphones empower you to capture stereo sound without external mics. The omnidirectional mics respond to sound from all directions and are permanently spaced apart in an A/B configuration, yielding a broad, sphere-like pickup pattern. Use them in combination with a shotgun, handheld, or lav mic to record direct sound and ambience at the same time.
Four XLR-1/4" Mic/Line Inputs with Independent Phantom Power
Four locking XLR-1/4" TRS combo jacks support mic level and +4 dBu line level, allowing you to record external microphones or balanced outputs from a professional multichannel mixer. With individually switchable phantom power (24V or 48V) and up to 64 dB of gain, the low-noise HDDA (High Definition Discrete Architecture) mic preamps can serve a variety of microphones such as dynamic, ribbon, or condenser types.
3.5mm Mic/Line Input with Plug-In Power
For maximum intelligibility and optimal vocal tone, recordists often prefer to use lavalier microphones that can be attached to their subject's clothing. The DR-701D's 3.5mm mini-jack input is designed for precisely that situation; clip a lav mic (available separately) to the talent, then plug it into the 3.5mm input on the DR-701D. Knowing that many lav mics require a small amount of voltage called plug-in power, Tascam offers a selectable setting to supply plug-in power to the 3.5mm input. If you need to record the output of a wireless microphone receiver or an audio mixer, the 3.5mm input can accommodate it because it supports line-level signal and handles a maximum input level of +10 dBV.
3.5mm Camera, Line, and Headphone Outputs
The DR-701D boasts three 3.5mm outputs for simultaneous hook-up to your camera, a secondary recorder, and headphones. The headphone output offers a dedicated volume control next to the jack, while levels for the camera and line outputs can be changed in the menu system. Plus, the side-panel 3.5mm camera input is ideal for simple monitoring of playback from your camera.
Supports SDXC Cards up to 128GB
To maximize compactness and portability, the DR-701D records directly to media cards (available separately). It supports SD, SDHC, and SDXC cards (up to 128GB capacity) for long recording times in standard or high resolution. With an 8GB card, the DR-701D can record in stereo for over 12.5 hours at 16-bit / 44.1 kHz using the uncompressed, BWF-compliant WAV format.
Ambisonics Support for VR Audio
Version 2.00 firmware brings support for Ambisonics recording by enabling encoding both A and B formats and providing a real-time stereo monitor mix of B-format content. Additional features specialized for Ambisonics audio production include AmbiX and FuMa B formats, simultaneous 4-channel gain control, and selectable Ambisonics mic positioning.
HDMI I/O for Tight Camera Synchronization
The HDMI I/O ports allow the DR-701D's internal clock and your camera to be digitally synchronized. Even when shooting long events, the video files recorded by the camera and audio files recorded by the DR-701D will not drift out of sync.
Simply pressing the record button on your compatible camera sends a trigger to the DR-701D to start audio recording. Unlike other systems that force you to press record on both devices, the HDMI start system prevents missed takes, syncs the two recording starts together, and makes single-operator shoots much easier.
Timecode Generator and Input
The built-in SMPTE generator allows your camera and DR-701D to store the same location reference. Several options are available to integrate SMPTE timecode into your camera system. The BNC timecode input can follow a source signal or can be jam-synced a few times per day for independent freewheel operation.
Cameras that send timecode through their HDMI output can be followed by the DR-701D's timecode input. Alternatively, the internal generator can be started without an external reference for a simple time-of-day stamp on recorded BWF files.
Powered via AA Batteries, USB, or AC Adapter
Using four AA alkaline batteries (available separately), you can power the DR-701D for up to 3.75 hours of stereo recording time at 16-bit / 48 kHz resolution with the onboard mics. For long-duration sessions that require extended recording time, the DR-701D may be powered via a USB connection to a computer, mobile battery, or optional BP-6AA battery pack, or through the Tascam PS-P515U AC adapter (available separately).
Ideal for Tripod- or Camera-Mounted Use
With a lightweight and solid magnesium alloy chassis, the DR-701D can be placed between a DSLR camera and a tripod or mounted to a cage or follow-focus rig. A tripod socket is on the bottom of the unit, and a removable tripod bracket is mounted on the top. Remove the tripod bracket to access the integrated hot shoe. Also, handles on the front left and right sides protect the screen, and permit the attachment of a shoulder belt. All batteries can be replaced without removing the DR-701D from the camera or tripod/rig.
In the likely event that you need to use the transport and slate buttons while shooting, you don't need to worry about picking up clicks in the recording. The DR-701D's soft-touch rubber keys are designed for quiet operation to eliminate handling noise.
Stereo Safety Track Recording
Filmmakers and videographers often experience sudden audio volume spikes during filming. An actor could suddenly scream, or a documentary subject could do almost anything. The DR-701D has a dual-recording mode that captures a copy of your take (from a selectable mono or stereo input) up to 12 dB lower (adjustable in -1 dB increments) as a safety track in case of sudden distortion.
Enhance the sonic impact of your audio with the DR-701D's built-in mixer. Each input features adjustable panning, level, limiting, polarity, and up to 300ms of delay. A multiband limiter is employed to affect only the frequency ranges that have excessive input signal levels. Mitigate wind noise and low-frequency rumble by selecting the low-cut filter, which can be set at 50, 80, 120, 180, or 220 Hz.
Tone Generator for Synchronising Files
An internal tone generator makes it easy to synchronise files recorded on the DR-701D and your camera. When the DR-701D is connected to a camera, the adjustable slate tone may be sent to the camera and recorded to the DR-701D. The resulting tones can be used as guides when synchronising the files in video editing software. Generate slate tones automatically at the head (or head and tail) of each clip, or manually via the slate button. Playback can be skipped to the slate tone insert position using the data dial.
Supports External Remote Control
Hand- or foot-operated remote control is possible via the RC-3F footswitch or RC-10 wired remote (both available separately); start/stop recording, make marks, increment tracks, and more without having to touch the DR-701D.