- 1x MagBox 24" Octa Softbox
- 1x MagRing that supports 2 speedlights
- 1x MagShoe for hand holding or stand
- 1x MagBox Fabric Diffuser
MagMod MagBox 24 Starter Kit
The MagBox 24 started kit from MagMod contains everything that you will need to maximise the potential of your speedlight. This starter kit contains a 24" MagBox Octa, a MagRing that will support either one or two speedlights, MagBox Diffuser and a MagShoe that allows you to handhold the setup or mount it to a stand.
MagBox 24 Octa Softbox (24")
The MagBox 24 Octa Softbox is a one-piece design with a magnetic base for very fast set-up and breakdown and is compatible with Profoto, Bowens and Elinchrom. It has dedicated adapters for one or two speedlights with the addition of the MagGrip that is sold separately. One of this items most noticeable features is its evenness of output from edge to edge. This is done without an internal baffle and without exhibiting a hot spot.
Magnets inside the base of the MagBox makes attachment fast, strong and silent. Even if you are tilting or softbox to a deep angle the MagBox and MagRing are staying put.
Easy Set-Up and Take Down
The MagBox is in one solid piece. It can be popped open in one easy click and with magnets in the base you can attach it onto your MagRing in a second. When you are ready to remove the MagBox from the MagRing, simply press the Magnetic Field Disrupter. Then fold up the MagBox, it collapses into one neat, portable piece and can be stored safely in the MagBox case.
Speedlight and Strobe Compatible
The versatile MagBox can be used with either one or two speedlights. Any flash that has MagMod's MagGrip installed will work. Or you can use one of the available adapters to mount you Profoto, Bowens or Elinchrom.
The calculated design of the MagBox 24 Octa distributes light evenly and without a hotspot, the reason why this softbox is devoid of an internal baffle. It provides clean light quality and optimal output.
The MagMod MagRing is a universal lightweight speedlight mount that accepts up to two speedlights that have been outfitted with MagMod's MagGrip (not included). The MagRing features a cold shoe mounting foot and can mount to a MagMod MagShoe for handheld or stand-mounted use. Magnetic attachments are at the heart of the MagRing and are used to hold MagMod's MagBox softbox. Magnets also secure your speedlight when mounted with the MagGrip and the MagRing incorporates locking doors for further security.
This MagMod MagShoe for MagRing is a lightweight and ergonomic holder for your MagRing flash holder. The MagShoe can be mounted to a stand with a 5/8" pin or easily carried handheld and it accepts either a flash or the MagRing using a cold shoe mounting system. It has been designed so that you can operate it with only one hand, leaving your other hand free to hold you camera, which allows you to mount your flash or MagRing and lock in place with a single hand.
The single-handed operation is extended to the tilt function which can be controlled by a simple trigger that you squeeze to release the lock. This gives you a secure grip on the MagShoe while locking or unlocking it with the same hand that is holding it secure. Releasing the trigger engages the tilt lock which allows the MagShoe to support your MagRing, two flashes and the MagBox softbox. This item also integrates an umbrella mounting hole with lock that allows you to create that familiar soft look. The plastic exterior of the MagShoe is gentle on your hands and not accidently trigger your flash via its hot-shoe mounting foot.