DJI Ronin-MX Gimbal Stabiliser
- Supports Cameras up to 4.5KG
- Compatible with Matrice 600
- Robust Magnesium Construction
- Radio Controller for Second Operator
- iOS / Android App-Based Control
- SmoothTrack Technology
- Upright, Underslung and Briefcase Modes
- Supports Mounting of Second DJI Battery
- USB and D-Tap Power Outputs
- Universal Mount for Jibs, Car Mounts
The Ronin-MX for DJI is a dual-use gimbal suitable both for mounting on the Matrice 600 aerial platform as well as deployment closer to the ground. It is an improvement on the Ronin-M and features a magnesium construction to yield high rigidity while keeping the weight down. The gimbal is suitable for cinema cameras, mirrorless camera and DSLRs weighing up to 4.5KG. out of the box it supports two-operator operation and includes a radio controller (transmitter) for camera operator. There is also an optional Thumb Controller (available separately) for solo operation. When installed on the Matrice 600 aircraft, the gimbal can be controlled via the DJI Go app. An included universal mounting adapter allows it to be adapted for us with jibs, car mounts and various other types of camera support equipment. There is also a handlebar for handheld use.
Built to Perform
Designed to resist high G-forces using powerful motors and IMUs, the Ronin-MX is engineered to maintain stability and hold horizon when mounted to an aircraft or a vehicle. When mounted to the Matrice 600 aerial system, it communicates directly with DJI's flight controller. When attached to vehicles, it connects to an optional GPS module that allows it to stabiliser actively for a smoother shot.
360° Freedom of Movement
A slip ring allows the Ronin-MX to rotate 360° continuously when mounted to aircraft or vehicles, opening up more creative options. This is further enhanced by an increase in tilt-axis range (compared to the Ronin-M) from 90° straight down and beyond to 135°. Popular features of the Ronin series, such as the three modes of operation and SmoothTrack, are also present, giving filmmakers a range of creative angles and movements.
Wireless Control and Transmission
The Ronin-MX is compatible with Lightbridge 2, providing long-range HD video transmission from the air to the ground from up to 3.1 miles away. If combined with the separately available DJI Focus and Focus Expansion Module, focus or aperture can also be pulled remotely with a twist of the wrist. An optional Remote Start/Stop add-on provides the ability to control shooting on a range of airborne cameras.
Using DJI Assistant and the dedicated Assistant app for iOS and Android allows complete customisation of the Ronin-MX and its behaviour. If connected to Lightbridge 2, the DJI GO app can be used to control the gimbal and see a HD live feed from the camera.
A redesigned structure moves the Ronin-MX battery from the back to the front. This centres the weight of the camera, minimising instability when flying directly forwards. It also dramatically increases the Ronin's agility and ability to handle rapid movements or high-G situations.
Built extensively of lightweight magnesium, the Ronin-MX weights just 1.4KG. this lightness allows it to be mounted to the Matrice 600, even when equipped with cameras as advances as the RED EPIC and to vehicles with a minimum impact on vehicle handling.
Strengthen Motors and ESCs
A combination of stronger motors and ESCs makes the Ronin-MX 50% more powerful than the Ronin-M. This additional stiffness and power allows the system to better withstand wind resistance, when mounted to moving vehicles and aircraft, as well as more rapid movements.
External Camera Battery
Cameras such as the Red EPIC need an external battery for power. A dedicated position designed for an optional battery plate provides an easy, cable-free mounting point for a second DJI Intelligent Battery. This provides two 12V D-Tap power sources for powering cameras and accessories.
Ronin-MX batteries offer a battery life of up to three hours. Over-charge and over-depletion protection are built-in, as in individual cell charge balancing. Remaining power is shown by clear LEDs and in the DJI GO app.
Built-In Power Distribution
A dedicated power distribution box keeps wiring to a minimum while providing power to essential accessories. Two regulated 12V D-Taps, one 500mAh full-size USB connector and a DJI Lightbridge connector enables connectivity and power to nearly everything a filmmaker might need.
Solo Mode with Optional Thumb Controller
The separately available Ronin Wireless Thumb Controller makes controlling the Ronin-MX easy and intuitive, enabling the capture of shots that would otherwise be impossible for a single operator.
Second Operator Control
A wireless 2.4 GHz remote controller is included with the Ronin-MX enabling a second operator to remotely control pan, tilt, roll and other functions.
Three Operation Modes
- Upright Operation Mode: Upright Mode allows the gimbal to be flipped over so the camera can be operated closer to eye level without straining to lift the gimbal. This can be used in various situations, such mounting on the top of the vehicle.
- Underslung (Suspended) Operation Mode: suspended Operation Mode is the standard operation mode for the Ronin-MX. Low slung, close to the ground, or simply holding the gimbal in front of you offers stabilised handheld footage. This mode would also be used when mounting the gimbal on a flying platform such as a multirotor RC helicopter.
- Briefcase Mode: When a slimmer gimbal profile is needed, such as when moving through doorways or narrow paths, Briefcase Mode is ideal. It allows the gimbal to be held to the side and close to the legs, much like a briefcase.
Even with one operator, SmoothTrack technology is designed to ensure the Ronin-MX translates movement into smooth camera angle changes. SmoothTrack settings, from speed to deadband to acceleration, are fully customisable. A "Single Axis Follow Mode" enables two axes to be locked while SmoothTrack guides the camera along only one axis of motion.
Mount the Ronin-MX to aircraft using a specially designed mounting plate. A separate universal Quick Release system that doubles as a vibration-dampening system to allow the Ronin-MX to be connected to everything from jib to tripod and anything in between. This plater isolates the Ronin-MX from unwanted vibrations coming from the platforms it is mounted to.