Please wait...

{{var product.name}}
Added to basket

Continue shopping
View Basket & Checkout
Continue shopping
View Basket & Checkout

DJI Ronin-M Gimbal Stabiliser

DJI Ronin-M Gimbal Stabiliser play

  • DJI Ronin-M Gimbal Stabiliser
  • DJI Ronin-M Gimbal Stabiliser
  • DJI Ronin-M Gimbal Stabiliser
  • DJI Ronin-M Gimbal Stabiliser

YOU MIGHT ALSO LIKE TO LOOK AT

  • DJI Osmo Mobile 2 Smartphone Gimbal

    The DJI Osmo Mobile 2 Smartphone Gimbal carries over most of the feature from the original version and offers several ke...

    Regular Price: £129.00

    Special Price £99.00

    Availability: In stock

  • DJI Ronin-S Essentials Kit

    The DJI Ronin-S is commonly known as a miniaturised version of the larger Ronin gimbal stabilisers. It represents a stab...

    £459.00

    Availability: Out of stock

  • DJI Osmo Pocket Gimbal

    The DJI Osmo Pocket Gimbal is a lightweight gimbal stabiliser and 4K camera combination that is compact enough for you t...

    £329.00

    Availability: In stock

  • DJI Osmo Action 4K Camera

    The DJI Osmo Action 4K Camera has you covered in all situations, from skiing, surfing, biking, running, driving, selfies...

    £319.00

    Availability: In stock

  • DJI Ronin-S

    The DJI Ronin-S is commonly known as a miniaturised version of the larger Ronin gimbal stabilisers. It represents a stab...

    £669.00

    Availability: In stock

REVIEWS

Read other customers views on this product.

DJI Ronin-M Gimbal Stabiliser
105476

Regular Price: £939.00

Special Price £899.00

Availability: In stock

OR

PRODUCT OVERVIEW

The Ronin-M Handheld Gimbal Stabiliser from DJI is a camera stabilisation system designed to give the operator as close to the freedom of unencumbered handheld shooting as possible without the hand-shake. It is suitable for most camera types and configurations of up to 3.6KG. The Ronin-M uses brushless motors that work on three axes: one for side-to-side "roll" (keeping the horizon level), one for tilt and one for pan. The system is computer-controlled and features a tilt range of 105° up / 165° down plus a roll range of ±110°. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support system unsuitable.

Details

DJI Ronin-M Gimbal Stabiliser

Key Features

  • Supports Cameras up to 3.6KG
  • Precision of Control ±0.02°
  • Transmitter for Remote Pan/Tilt Control
  • Toolless Balance Adjustment System
  • Assistant Software for iOS and Windows
  • Bluetooth Wireless Interface for Setup
  • Silent Mode for Quiet Operation
  • USB and D-Tap Power Outputs

The Ronin-M Handheld Gimbal Stabiliser from DJI is a camera stabilisation system designed to give the operator as close to the freedom of unencumbered handheld shooting as possible without the hand-shake. It is suitable for most camera types and configurations of up to 3.6KG. The Ronin-M uses brushless motors that work on three axes: one for side-to-side "roll" (keeping the horizon level), one for tilt and one for pan. The system is computer-controlled and features a tilt range of 105° up / 165° down plus a roll range of ±110°. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support system unsuitable.

The Ronin-M supports dual-operator shooting, much like working with a jib that has a motorised pan/tilt head. When in this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin-M itself moves. The included transmitter/receiver system operates on 2.4GHz and is proprietary. If you prefer to use a third-part transmitter there is a D-Bus port on the Ronin-M to install your own receiver.

As with sled and vest style stabilisers, motorised gimbal systems require balancing before use. Once balances, you can configure the Ronin-M for your particular camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. It is known that all camera and lens combinations have a different mass and weight distribution, there is an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned. A gimbal tuning stand is also provided so you won't have to hand-hold the rig during this process.

The included 4S lithium-ion polymer battery powers the Ronin-M for up to six hours. It is a "smart" battery, meaning power regulation and protection circuitry is built-in and there is no sperate balancing lead, unlike many lithium-polymer batteries. A charger is also included, and it is important to always use chargers designed for the Ronin-M battery because of the smart circuitry. Two 12 VDC D-Tap ports and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin-M battery to simplify your charging regimen and avoid unnecessary added weight.

Features

For Cameras up to 3.6KG

The Auto configuration feature means the Ronin-M can adapt to a range of camera sizes and is ideally suited for compact video cameras, DSLRs and mirrorless cameras. It is suitable for payloads of up to 3.6KG.

Auto Configuration

After balancing the camera with a simple tap of the ATS (Auto Tune Stability) button, the Ronin-M will be automatically tuned for the mass and weight distribution of your camera rig. The gimbal will intelligently adjust parameters based on the camera rig's weight and independently adjust each of the three axes until an optimal setting is found.

SmoothTrack Control

SmoothTrack gives a single gimbal operator the ability to translate their tilt and pan movements of the gimbal into smooth and stabilised movements of the camera's angle. This is designed to make framing of board wide-angle scenes or even shooting in close quarters much easier during single gimbal operator use.

Three Operation Modes

  • Upright Operation Mode: Upright Mode allows the gimbal to be flipped over so the camera can be operated closer to eye level without straining to lift the gimbal. This can be used in a variety of situations, such as mounting on the top of the vehicle.
  • Underslung (Suspended) Operation Mode: Suspended Operation Mode is the standard operation mode for Ronin-M. Low slung, close to the ground, or simple holding the gimbal in front of your offers stabilised handheld footage. This mode would also be used when mounting the gimbal on a flying platform such as a multirotor RC helicopter.
  • Briefcase Mode: When a slimmer gimbal profile is needed in situations like moving through doorways or narrow paths. Briefcase Mode is ideal. It allows the gimbal to be held to the side and close to the legs, much like a briefcase.  

Second Operator Control

Featuring the form factor of an RC aircraft radio controller, the 2.4 GHz Ronin transmitter provides pan and tilt control as well as user-assignable speed settings and operations modes via two toggle switches. This allows one operator to hold the gimbal assembly while a second manually controls camera movement remotely. If you would rather use a third-party transmitter a D-bus port is provided as well.

Optional Thumb Controller for Pan / Tilt

Single thumb control is possible for the Ronin-M Handheld gimbal System. These Pan and Tilt movements are controlled via the optional Thumb Controller attachment, available separately. Additionally, SmoothTrack Mode can be turned on or off using the Thumb Controller interface.

Tool-Free Adjustment

A built-in balance adjustment system means no tools are needed for setup and adjustment, saving time when changing the setup for different camera arrangements.

Assistant Software for Mobile and Windows

A mobile device or computer to run the Assistant Software is essential. It is available for select iOS mobile devices and Windows computers. With the software you can:

  • Auto Configure the rig based on the weight and weight distribution of your camera after you've balanced it
  • Adjust SmoothTrack tuning to user preference
  • Enable and configure Second Operator Control
  • Run diagnostics and generate stats
  • Install firmware updates

The software can interface via USB or wirelessly over Bluetooth.

Universal Mounting

Beside the handlebars, the gimbal unit can be detached for mounting on jibs, cranes, tripods, vehicle mounts and other types of camera support equipment (additional mounting hardware, available separately, may be required).

Silent Mode

When shooing indoors or in tight spaces, Silent Mode reduces the sound of each motor as low as possible. The Ronin-M's stabilisation algorithms are updated to focus on minute changes and stabilisation, helping ensure the sound of the motors is not recorded by sensitive microphones or other recording equipment.

Solid Support Arm

Increased rigidity is provided by a single, complete piece of fine-tooled magnesium that forms the U-shaped arm holding the camera plate. This unified design helps eliminate imperfection common in systems made of multiple pieces assembled together. The arm gives you not only greater stability but also reliability, as there is no potential for separate pieces to come loose or move apart.

Power Distribution Box

Two regulated 12 VDC D-Tap ports, one 500mAh type A female USB connector and also a connection point for the DJI Lightbridge Long Range HD Video Downlink are provided. These provide power connection for various accessories, including motorised follow focus systems, video transmitters and more, all while keeping the wiring to a minimum.

Quick Release Smart Battery

Providing an estimated 6 hours of run time (depending on use), the proprietary Ronin-M battery system is designed for easy changes in the field and charges using an included dedicated charger. The batteries feature indicators so remaining power can be checked directly on the battery itself. Unlike many lithium-polymer batteries, with the Ronin-M Smart battery, overcharge and over depletion protection is built-in, as in individual battery cell charge balancing.

Quick Release Top Handle

The quick-release handle is designed to save time breaking the system down or transporting it between locations. Removing the handlebars can also be useful as a way of reducing size when filming in tight locations.

Based on Zenmuse Technology

The Ronin-M adapts the same brushless motor technology used in DJI's aerial gimbals for handheld, terrestrial use.

Specifications

Specification Overview

Model Ronin-M
MPN
(Manufacurer
product
no)
415013120
Brand DJI
Condition New
EAN 6958265121180
Product
Type
Accessories

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

phone 01772 252188
phone EMAIL US
phone YOUR LOCAL STORE
phone LIVE HELP

Sign up to our newsletter for the latest News, offers and events. We never share your details with anyone else.

Please fill in the email box and click the sign up button to receive our newsletter