Advanced Search

Search Site

Tascam TM-2X Stereo Microphone

Double click on above image to view full picture

Zoom Out
Zoom In

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also like these...

Sony XYST1M Stereo Mic For Multi-Interface Shoe

Sony XYST1M Stereo Mic For Multi-Interface Shoe

£109.99
Rode Mic NTG-2

Rode Mic NTG-2

£189.00
Rode Videomic Pro R

Rode Videomic Pro R

£159.00
Rode Mic Stereo Videomic

Rode Mic Stereo Videomic

£159.00

Tascam TM-2X Stereo Microphone

The Tascam TM-2X is a directional stereo condenser microphone for use with DSLR cameras. Designed with superior on-camera audio in mind, the TM-2X features an X-Y pattern for capturing a true representation of the sonic atmosphere, whether it's sound from a wide area or directly in front of the camera. The microphone comes complete with a noise isolation arm to reduce unwanted lens operation noise, as well as a furry windscreen for recording outdoors.

£84.00
  • High-performance X-Y stereo condenser mics
    The directional condenser microphones equipped on the TM-2X are the same mics used in our highly-regarded DR-series recorders. The X-Y pattern and two mic capsules are ideal for capturing a true representation of the sonic atmosphere, whether it's sound from a wide area or directly in front of the camera. As a result, the TM-2X records pristine sound that fits naturally with the recorded video.

    Delivers high audio quality and the capacity to handle high sound pressures
    We have consistently utilized our expertise in developing recording devices that focus on the design of the analog circuits behind the mic capsules. As a result, the TM-2X achieves a high performance rating and a frequency response of 50 Hz to 20 kHz. Furthermore, we designed the TM-2X with the capacity to handle high sound pressures up to 120 dB SPL to prevent distortion even in loud scenarios.

    Built-in stereo mini plug output can be connected directly to the camera mic input for simple setup
    Setup is as simple as connecting the cord from the TM-2X to the camera's mic input jack allowing you to add high-quality audio to video. The output can be set to one of two levels to enable compatibility with a variety of cameras.

    Floating structure reduces handling noise
    The floating support structure underneath the mics absorbs unwanted handling noise and sounds from cameras' mechanics.

    Noise isolation arm to reduce lens operation noise included    
    When capturing video using changeable auto-focus lenses, the sounds produced from the lens itself can disrupt and interfere with recordings. In situations where this noise is a problem, you can reduce the interruptions by using the included noise isolation arm. The noise isolation arm physically increases the distance from the noise source to reduce its capture. The structure of the arm, including its length and height, was developed through extensive testing.

    On-board Low-cut filter eliminates unwanted low frequencies
    The unit includes an on-board low-cut filter to cut out low-frequency background noise. Depending on the video recording scenario, you can choose to turn this feature on or off (LOW CUT/FLAT).

    Furry windscreen to reduce wind noise       
    When filming outdoors, even a slight breeze can enter the mic and cause wind noise. This unit comes with a furry windscreen that can physically prevent this noise from occurring. Wind noise can be reduced by simply covering the mic unit with this windscreen.

  • Microphone type cardioid
    Frequency range 50Hz to 20kHz
    Maximum input level 120dB SPL (at 1kHz, SENS:H, LCF=Flat, RL:2.2kΩ, Vcc:2.5V)
    Output impedance 1.6k ohms (RL:2.2kΩ, Vcc:2.5V)
    S/N ratio 74dB (at 1kHz, 1Pa, A weighted)
    Mic sensitivity switch SENS H:-37dB, SENS L:-52dB (at 1kHz, 0dB=1V/Pa, RL:2.2kΩ, Vcc:2.5V)
    Cable length 33cm
    Plug 3.5 mm (1/8'") TRS stereo mini plug (Tip: left channel, Ring: right channel, Sleeve: GND)
    Power Plug-in power (JEITA standard CP-1203A)
    TM-2X main unit 57(W)×59(H)×69(D)mm(not including cable and connectors)
    Noise isolation arm 34(W)×57(H)×142(D)mm
    TM-2X main unit Weight
    75g
    Noise isolation arm Weight
    41g
    Operating temperature -5 to 45˚C 23 to 142˚F
    Included Accessories Fur windscreen, noise isolation arm, Owner's Manual, warranty

     

Additional Information

Box Contents: Tascam TM-2X Stereo Microphone, Fur Windscreen, Noise Isolation Arm, Owner's Manual, Warranty
Manufacturer Tascam
Model TM-2X Stereo Microphone
MPN TM-2X