You may also like these...
Natural Stereo Sound
Based around a matched pair of high sensitivity ½”cardioid condenser capsules in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.
The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.
-10dB PAD Function
A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.
+20dB level boost Function
The Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
Broadcast recording quality on-camera microphone
Matched pair 1⁄2” condenser capsules in XY stereo configuration
Ultra lightweight, compact form factor
On mic power and EQ controls
Two step High Pass Filter (flat, 75Hz)
Three position level control (-10dB, 0, +20dB)
9V battery powered - over 100 hours use (alkaline)
Integrated shock mounting
Integrated foam windscreen
3.5mm stereo mini-jack output
Billeted metal camera shoe mount with 3/8” thread for easy boompole mounting
10 year extended warranty when you register your microphone
Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter Capsule 0.50" Address Type End Frequency Range 40Hz - 20kHz Output Impedance 200Ω Maximum SPL 134dB SPL (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 20dB-A Output 3.5mm Jack Power Options 9V Weight 115.00 g Dimensions 130.00mmH x 66.00mmW x 108.00mmD
|Model||Stereo VideoMic Pro|